The chain elevators consist of standard elements in galvanised versions. Outstanding feature is a large capacity, in spite of the small outer dimension, together, with quick and easy mounting.

The elevators utilize their total height very efficiently, as the outlet has a very high position ensuring that only 48 cm. are lost from the elevator top point to the outlet flange lower edge. The inlet is placed as far down as possible under the lower elevator shaft. The elevators are constructed from steel and supplied with quality roller chain fitted with riveted rubber carriers. The elevators work just as efficiently in all positions from vertical to horizontal.T20 and T40 consist of elevator head with motor bracket and V-belt pulley drive or elevator head with direct geared motor, elevator boot, 2.5 m. extension with inspection cover and extensions in different lengths: 2.5 m. – 2.0 m. – 1.0 m. – 0.5 m. – 0.25 m. – 0.125 m. When correctly combined the extensions provide elevator lengths from 3.0 m. to 20.0 m. in 0.125 m. steps.

The elevators can be combined for both horizontal and vertical conveying by using side augers in troughs. The elevator lower shaft drives these, so the same motor drives the elevator together with the side augers or the side augers can be separately driven by a direct mounted geared motor. The side auger in trough is available for fitting to both right and left side of the elevator. The augers have a dia. 135 with flights of S60, S90 and S125 and are available in different lengths: 2.0 m. – 1.25 m. – 1.0 m. – 0.5 m. The augers are connected with joining pins.

Chain elevator T20/T40

User Guide